Ditch Your Boring Bookshelf: Try This Modern-Style DIY Instead
If you're thinking about replacing your boring bookshelf and you're on a tight budget, chances are you plan to visit the usual retail suspects, such as IKEA, Amazon, Target, or Walmart. But, what if you could build one without breaking the bank, and it looks super stylish — maybe even store-bought? TikTok creator Shara Woodshop Diaries builds a minimalist and low-cost freestanding bookcase using just a single sheet of plywood. What's also great about this design is that its staggered shelves allow you to stand taller items alongside shorter ones to create visual interest and variety.
You will need to be somewhat familiar with woodworking, but you might be able to DIY this piece even if you have limited hands-on experience. Pick up a 4-by-8 sheet of plywood that's ¾ inches thick, and 1¼-inch wood as well as pocket hole screws. Tool-wise, you'll need a drill, saw (circular or table can work best and save time), a woodworking or other precise marking ruler (such as a T-square), and pocket hole jig. If you've never worked with pocket holes, be sure to first read up on how to drill pocket holes. Alternatively, if you don't have a pocket hole jig, you can use another form of joinery you're more comfortable with, such as butt or box joints (reinforced with wood glue).
Build a modern bookcase with one plywood sheet
To start, the DIYer cuts the sheet into several parts: two bookcase sides, the top and bottom, one "spine" to sit just inside the frame, and seven equal-length shelves. She lightly sands all the pieces before joining the four frame sides via pocket holes and screws. Then, she slides the spine into the center of the frame, flush with the frame's back, and used straight screws to butt-join the piece to the top and bottom panels. She attaches four equidistant shelves to the left side of the frame, once again using pocket holes and screws. To reinforce these, she drives straight screws (two per shelf) from the back of the spine right into the shelves. Finally, she repeats this process with the three remaining shelves on the right side, positioning them between the left shelves to stagger them. While the creator's TikTok video goes into the basics of the project, her YouTube video counterpart goes into further detail if you need.
If you take on this project, consider customizing the design further. One of the first decisions you should make is which material to use. For instance, hardwood plywood sheets are faced with real wood veneer, such as oak, birch, and maple. So, choose a type with grain and tone you prefer. To make the piece look cleaner and more finished, you can apply coordinating edge banding to all the parts before starting assembly, as well as pocket hole plugs after assembly. And you can stain the plywood (or paint it) to better match your decor. If you like the natural tone, simply seal it. Depending on how tall you make the piece, you should look into anchoring the top to a wall. Not feeling confident enough to take on a freestanding bookcase? Try this simpler DIY bookshelf that mounts onto the wall.