How to Clean a Frigidaire Refrigerator Coil

Hunker may earn compensation through affiliate links in this story.
It is important to clean your refrigerator coils in order for it to run at its best.
Image Credit: zstockphotos/iStock/GettyImages

Upkeeping a clean refrigerator is a given when it comes to maintaining the longevity of your unit, but if you haven't cleaned your condenser coil in a while or ever, you're causing more harm than good. If you don't know where the Frigidaire refrigerator condenser coil location is, it's relatively easy to find once you know how to spot it.

Purpose of Cleaning Coils

Before you clean your coil, you need to know the Frigidaire refrigerator condenser coil location. According to Appliance Outlet Service, the condenser coil is where freon gets put under pressure. When freon is put under pressure it gets warm, which is what allows the fridge to run.

The condenser coil must be kept clean so that hair or dust doesn't accumulate there. According to Appliance Outlet Service, if this happens, the sealed system will overheat, and the compressor will shut off. That's why you need to keep this area regularly cleaned using a refrigerator coil brush.

Frigidaire Refrigerator Condenser Coil Location

When you get ready to clean the coils, there are a couple of areas where you can find them depending on what type of refrigerator you have. For the Frigidaire refrigerator condenser coil location, you can find them located at the back of the fridge or across the bottom. In other models, such as a General Electric fridge, the GE side by side refrigerator coil location will be located near the compressor behind the refrigerator.

Finding Side By Side Location

If you're trying to find the Frigidaire refrigerator condenser coil location, in most standard fridges, the coil will be located behind the refrigerator, underneath an access panel. To access the coil, you have to remove the access panel at the bottom of your fridge. When removing this panel, you have to be careful because it's made out of sheet metal. According to Appliance Outlet Service, when accessing the condenser coil, you also need to be aware of the fan that keeps the compressor from overheating.

Although most of the condenser coils are located in the back of the fridge, you can also find them under the refrigerator. To access these coils, you need to remove the grill on the front. Once you remove the grill, you'll be able to access the front of the fridge where the coil is located.

How to Clean

According to GE Appliances, the best way to clean condenser coils is by using a refrigerator coil brush. After you figure out the GE side by side refrigerator coil location, you need to unplug the fridge. This lessens the possibility of electric shock.

If the coils are at the bottom of the fridge, you're going to have to remove the grill and use a refrigerator coil brush to scrub away any dust, dirt or pet hair. Before you plug the fridge back up, put the grill on first.

Cleaning the Back of the Refridgerator

According to GE Appliances, if the coils are located at the back of the refrigerator, you can also clean them with a refrigerator coil brush. First, you're going to have to unplug the fridge and move the unit away from the wall. Then, using the refrigerator coil brush, you can wipe up any dust, dirt or pet hair. After you vacuum up the debris, you can push the fridge back into place.

When pushing the refrigerator back into place, you must make sure that you don't run over the fridge cords or tubing. Once the fridge is back in place, you can plug it back up.

references

Allanah Dykes is a freelance writer and her work has been featured on Elite Daily, Levo League, Popsugar, Complex, Gurl, The Kitchn, HelloGiggles, Revelist, and Food 52.

View Work