Hang String Lights Around Windows 10x Faster With A Clever Hot Glue Trick
We may receive a commission on purchases made from links.
String lights are a joy to behold, but hanging them? Not so much. As you fasten one bulb, another falls, like some annoying ambient version of Newton's cradle. Hanging string lights around your windows can be especially tricky, since you can't exactly drill into vinyl or glass. Self-adhesive hooks are an option, but you'll need a lot of them if you're going for a straight look that isn't draped, and that's not too pretty, cost-effective, or quick, either. However, if you have a glue gun handy, you can securely fasten a bulb in little more than the time it takes to say "Boop!"
For this hack, you'll need a hot glue gun with a low temperature setting and plenty of glue sticks to cover the area. Regular hot glue works best when hanging outdoor string lights on metal, stone, concrete, or brick around the window. Ideally, it'll be a coarse, porous surface that will give the glue some grip. If you're attaching the lights to vinyl stripping, it's best to use a specialized stick, like Surebonder High-Strength Tough Hot Glue Sticks, with a high-heat glue gun and to test the glue first to make sure it won't damage the material. Glass will hold temporarily, but glue may pop off occasionally, so it's helpful to supplement with suction cups to distribute the weight should you have to add support directly on the window pane. When you're hanging Christmas lights on stucco, wood, or other potentially sensitive surfaces, test the hot glue on an out-of-the-way spot to see how cleanly it pulls away when dried.
How to hang string lights around windows using hot glue
Before you start, plug your string lights in to make sure they work. You can leave them plugged in if you like, which also frees you up to use the female end of the plug for your glue gun. Set your glue gun to the low setting, wait for it to heat up, and apply a dollop of glue to the flat side of the light bulb's socket. Then, quickly apply the bulb to the surface. Press it in place for a few seconds or however long it takes your glue to cool and set, which may take longer in warm weather. Hold up the loose end of the string as you work so that the weight of the rest of the lights doesn't pull on the glued points.
When it's time to take your lights down, grab your bulb and gently angle it upward to pop it off. A flat-head screwdriver, butter knife, or chisel might help on tricky parts to help scrape the glue loose from the surface. The glue itself may pop off on its own, but you can use isopropyl alcohol or acetone on non-treated surfaces like glass or vinyl to remove it. If you're concerned about damage, always test a small inconspicuous area beforehand.
One final precaution: This light-hanging hack is not safe for drywall and painted surfaces. After it dries, hot glue can easily peel off paint or leave a residue behind. If you plan on keeping your lights up permanently, it will certainly adhere, but a string light hanging method using nails may be easier to repair if you ever change your mind.