Give Your Hose A Much Needed Upgrade With A DIY Attachment Made Of PVC Pipes
When you're using a garden hose to water the lawn or the garden, it can get pretty tiring when you have to use your thumb to make a spray pattern. Not only tiring, but also inaccurate, because the pattern changes whenever you move your thumb, which means some areas may get too much water while others don't get enough. And if you move your thumb the wrong way, you get doused. Enough! It's time for a nozzle, and while you could just go ahead and buy one, YouTube user Baby ที่รัก shows a way to make one out of PVC pipe.
In its simplest form, this PVC sprayer consists of a short length (3 to 6 inches) of ½-or ¾-inch PVC pipe, a PVC cap of the same diameter, and a hose clamp to connect it to your garden hose. You simply glue the cap onto the end of the pipe with PVC cement, drill holes in the cap to allow water to come out, and connect it to the hose with a pipe clamp.
You can adjust the spray pattern by varying the number of holes and the diameter of the bit you use to drill them, but those are the only modifications you can make with this simple design. It doesn't provide a way to turn the water on and off and requires cutting the female threaded connector off the hose so you can use the pipe clamp. This design is easy to improve.
Adding versatility to the simple design
The first improvement you can make is to add a PVC ball valve to turn the water on and off without having to use the faucet. You might have an old valve lying around that you can use, but if you have to buy one, expect to spend around three dollars, which is less than you'd spend on a nozzle. Instead of one length of pipe, you'll now need two — one for either end of the valve. They don't have to be long, so you might be able cut the pipe you have in two, if it's long enough.
Another modification you can make that will save you having to cut the connector off your garden hose is to glue a male adapter with ¾-inch hose threads onto the end of the nozzle. This will add less than a dollar onto the cost and allow you to screw the nozzle onto hoses you can't cut, like braided steel and expanding ones.
A third hack is to make the cap removable so you can adjust the spray pattern by changing it. To do this, glue a male adapter onto the end of the nozzle opposite the one that attaches to the hose, and purchase a number of threaded caps, which cost less than $1.50 each. Drill a different spray pattern in each cap, and when you want to change the spray pattern, just unscrew the cap you're using and screw on a different one.