Use PVC Pipes To Keep Garden Tools Organized With This Easy DIY

Add Hunker on Google:
Google Discover

There are so many garden tools. Tools for weeding, planting, raking, spreading seeds, building raised garden beds, and so much more. Even if you only have the essential tools for home gardening, storing them all can be headache inducing. If you're tired of digging through boxes or piles of tools to find just the right one, then grab some PVC pipes, a saw, a drill, and screws. You can make an easy and effective tool organizer that's mounted directly to the side of your garden shed or garage. The idea behind this hack is fairly simple. The handle of a tool can be slid into a PVC pipe, but the head is often too wide to fit through it. If you mount sections of PVC pipe to your wall, you can effectively use them like pockets to hold your rakes, shovels, and other assorted tools.

Depending on the size and shape of your tools, the final PVC pipe tool holders may look a little different. For tools like rakes or trowels that are more or less a straight line, the PVC pipe will be mounted vertically. However, you can also mount the PVC organizer horizontally or at an angle, creating a shelf or pocket for tools that have more unusual shapes. This includes drills, shears, or even the spray nozzle for a water hose. All three methods use the same tools and roughly the same steps, so you can follow this guide and make minor adjustments to suit each of the tools you need to store.

Building your PVC pipe tool organizers

Start by cutting your PVC pipe into smaller sections. Six inches to one foot is a good range to aim for, but you may need to adjust for longer or shorter tools. You can cut the ends straight or at an angle. Angling the top keeps tools back against the wall. Angling the bottom can create a pocket for smaller tools, as you can place the angled end against the wall.

If your PVC organizers will be mounted vertically, your next step is to cut a slit in the front of the pipe. You can skip this if they'll be lower to the ground or hold smaller tools. Depending on how high you want to mount the finished organizers, there may not be room to put longer tools into them from the top. Cutting the PVC pipes lengthwise lets you slide tools in from the side instead. The slit should be slightly wider than the handle of the tool. If the top of your PVC is already angled, cut the slit on the taller side, so that the slanted end slopes away from the opening. For horizontal organizers, cut the slit only partway down the side of the pipe, leaving some of the side solid to support the base of the drill or other tool. Use screws to mount the PVC pipe sections to your wall or a wood board and they're ready to hold your garden tools.

Recommended