A LaCrosse Weather Station not only tells you the current temperature and humidity, but also displays the time and date as well. The weather station is constantly monitoring both indoor and outdoor temperatures and humidity. The device includes a digital display, is mountable on any wall and also includes a stand for placing the device on a table or desk. You can even reset the time on your LaCrosse Weather Station in the event the device's batteries are weak and the time is off or blank.
Preparation
Video of the Day
Step 1
Turn the LaCrosse Weather Station over, remove the device's battery cover and batteries from the unit. Place the batteries to the side.
Video of the Day
Step 2
Press one of the buttons on the front of the weather station 20 times. It doesn't matter which button you press.
Step 3
Place the batteries back in the unit according to the diagram on the battery door. Wait 15 minutes before proceeding to the next section.
Resetting The Time Using Radio Controlled Time (RCC)
Step 1
Press and hold the "Set" button on the unit for five seconds. Your unit's display will start flashing along with a number from zero to seven. Press the "CH/+" button to set the display's contrast.
Step 2
Press and release the "Set" button to set the contrast. Press and release the "CH/+" button to select your time zone. Press and release the "Set" button.
Step 3
Press and release the "CH/+" button to toggle Daylight Savings Time "On" or "Off." Press and release the "Set" button.
Step 4
Press and release the "CH/+" button to toggle Radio Controlled Time (RCC) "On" or "Off." Radio Controlled Time sets your LaCrosse Weather Station's display time automatically via a satellite. To use this feature, press the "CH/+" button until "ON" is showing on your unit's display.
If you want to manually set your weather station's clock, proceed to Section 3 -- "Resetting The Time--Manually."
Step 5
Press and release the "CH/+" button to turn the WWVB reception to "On." Press and release the "Set" button to confirm your settings.
Step 6
Complete the steps in Section 4--"Setting Snooze & Forecast Settings" section.
Resetting The Time--Manually
Step 1
Complete steps 1 through 3 in the "Resetting The Time Using Radio Controlled Time (RCC)" section above.
Step 2
Press and release the "CH/+" button to select "OFF" for the Radio Controlled Time (RCC) setting. Press and release the "CH/+" button to turn the WWVB reception to "On." Press and release the "Set" button.
Step 3
Press and release the "CH/+" button to select "12h" time or "24h" military time. Press and release the "Set" button.
Step 4
Press and release the "CH/+" button to select the hour, minute, year and date settings. Press and release the "Set" button after each setting.
Step 5
Complete the steps in Section 4--"Setting Snooze & Forecast Settings" section.
Setting Snooze & Forecast Settings
Step 1
Press and release the "CH/+" button to select the snooze setting. Press and release the "Set" button.
Step 2
Press and release the "CH/+" button to toggle between "Fahrenheit" and "Celsius."
Step 3
Press the "CH/+" button to select the forecast sensitivity--"1" for areas with a relatively constant air pressure; "2" --medium setting; or "3" for areas with significant air-pressure changes.
Step 4
Press and release the "Set" button. Your LaCrosse Weather Station's time is now reset.