Excavators are machines that use hydraulics for digging. They are often used on construction sites for soil excavation and to load dump trucks. However, if you need to dig or move a lot of soil in a smaller location there are more-compact models available. One manufacturer that specializes in small-model excavators is Kubota. It produces an excellent line of excavators that are the perfect size for home landscaping projects.

A mini excavator using its bucket and blade to lift the tracks off the ground.

Step 1

Turn on the Kubota excavator. To turn the machine on, you have to be seated with the left armrest in the raised position. To raise it, pull up on the red lever ahead of the left armrest. In this position, the hydraulics are locked and an accidental bump of the joysticks will not move the machine. Set the throttle to low and turn the key in the ignition. The throttle knob is just ahead of the ignition to the right of the seat.

Step 2

Lower the left armrest. To unlock and use the hydraulics, the left armrest must be in the lowered position. Firmly grab the handle ahead of the left joystick and push it down until it locks.

Step 3

Increase the throttle. To add power to the machine when working, you will want to have the throttle set to approximately 3/4 speed. If you are working with an unusually heavy load you may want to use full throttle.

Step 4

Move forward and backward. The travel of the machine is controlled by two foot pedals. Each pedal lets you control one track. To move straight forward or backward, press both pedals with equal force. To turn, press one pedal more than the other. Because the cab spins relative to the tracks, pressing forward on the pedals may actually cause you to move backwards depending on your orientation. Always apply a small amount of force to the pedals when beginning to move to ensure that you know which way you will travel.

Step 5

Raise and lower the main boom. The main boom is the first section of the "arm" of the excavator that is attached directly to the machine. To raise it, pull back on the right joystick. To lower the main boom, push the right joystick forward.

Step 6

Move your stick boom. The stick boom, also known as the crowd or secondary boom, is the second part of the "arm" of the machine that is between the main boom and the bucket. To move the stick boom closer to yourself, pull back on the left joystick. To move it away from yourself, push the left joystick forward.

Step 7

Curl your bucket. When you curl your bucket you are rotating it in a scooping fashion. This is the action that you use to fill the bucket with soil. To curl, pull your right joystick to the left. To uncurl or dump your bucket, push your right joystick to the right.

Step 8

Spin the excavator. To move the bucket of your Kubota excavator to the right or left, you have to spin the entire machine. To spin the the right, pull the left joystick to the right. To spin the the left, push the left joystick to the left.

Step 9

Control the plow. The plow, also known as the blade, is controlled with a lever to the right of the seat, just ahead of the throttle control. To move the blade up, pull back on the lever. To push the blade down, push forward on the lever.