How to Open a Remington Gun Safe

Remington Gun Safes, also known as Liberty Gun Safes, are available in a wide variety of styles and sizes to protect your guns and other valuables against theft and fire. Remington Gun Safes secure your guns with one of four styles of locks: a standard combination dial lock, a key-locking combination dial lock, an optional S&G Motorized 6120 electronic lock and an optional S&G Z02 Direct Drive electronic lock with rotating keypad. The method used to open your Remington Gun Safe depends entirely on the type of lock selected when you purchased the safe.

...

Standard Combination Dial Lock

Step 1

Grasp the dial and turn it left counterclockwise two complete revolutions. Continue to turn the dial left and stop when the first number of your combination rests directly under the pointer at 12 o'clock.

Step 2

Reverse direction right clockwise and turn the dial so the second number of your combination passes beneath the pointer. Continue turning and then stop turning the dial when the number rests under the pointer.

Step 3

Move the dial left and stop when the third number of your combination rests at 12 o'clock.

Step 4

Turn the handle and open the safe's door.

Key-Locking Dial Combination Dial Lock

Step 1

Insert the dial key into the keyhole on the dial and turn it clockwise a half turn to unlock the dial.

Step 2

Grasp the dial and turn it left counterclockwise four complete revolutions of the dial. Stop with the first number of your combination directly under the pointer in the 12 o'clock position.

Step 3

Reverse direction and turn the dial right clockwise so the second number of your combination passes under the pointer twice. Continue turning and then stop turning the dial when the number rests under the pointer.

Step 4

Move the dial left, passing the third number of your combination under the pointer once, and then stop when the number reaches the pointer again.

Step 5

Rotate the dial right and stop with the number "87" at the 12 o'clock position.

Step 6

Turn the handle and open the safe's door.

S&G Motorized 6120 Electronic Lock

Step 1

Move the handle so it is centered on the door between the left and right stop points.

Step 2

Enter your 6-digit code on the keypad--each number within 10 seconds of the next number--and then press the "#" key once.

Step 3

Turn the handle immediately--within six seconds--and pull open the safe's door.

S&G Z-02 Direct Drive Electronic Lock

Step 1

Rotate the keypad left counterclockwise until you can't turn it any more.

Step 2

Enter your combination into the keypad and then press the "#" key once.

Step 3

Move the keypad right clockwise immediately--within six seconds of entering your combination--until it stops at the 2 o'clock position.

Step 4

Turn the handle on your safe and pull open the door.