Things You'll Need
Vacuum up any debris sitting on the liner surface weekly to prevent staining.
A swimming pool liner, constructed of a plastic vinyl material, prevents water from escaping the pool and saturating the ground nearby. The pool's liner directly contacts the water and as such can become dirty due to debris entering the water and settling down onto the surface of the liner. Cleaning a dirty vinyl liner requires vacuuming and scrubbing off stuck-on dirt and debris with a pool brush.
Assemble the swimming pool's vacuum equipment. Run the vacuum over the vinyl liner slowly, picking up dirt and debris. If debris gets stirred up as you vacuum, stop vacuuming and allow the debris to settle on the liner before continuing. Vacuuming removes large debris and any loose dirt from the vinyl liner.
Attach a pool brush to a pool pole. Brush any sections of the vinyl liner that have heavy staining or other stuck-on dirt. Brush the dirt to one spot on the liner, then suction up the debris with the pool vacuum.
Shock the pool with granular chlorine if stains remain. Typically a pool needs 1 pound of shock per 10,000 gallons of water. Turn on the pool filter to circulate the treatment for at least three hours.
Brush the remaining stains with the pool brush. The shock treatment will have weakened organic stains, allowing them to be removed.
Allow the pool to circulate normally and vacuum up debris that settles onto the liner, using the vacuuming equipment. Skim the pool surface with a leaf net to collect any surface debris.
Justin A. Mann
Justin A. Mann has been a freelance writer since 2007. Mann is experienced with computers and all things relating to swimming pools, and he uses his knowledge in these fields to write articles for various websites. Mann is an English major at East Central University.