Soft close cabinet hinges, sometime referred to as "buffers" or "shock absorbers," are a simple way to eliminate the slamming of cabinet doors equipped with self-closing or euro-type hinges. The soft close hinge is actually a small mechanism that controls the closing of the cabinet door in the final couple of inches. Soft close hinges are easy to install and will add a quieting feature to your kitchen.

...

Step 1

Position a soft close hinge just below the upper cabinet door hinge, aligning the front edge of the hinge's metal assembly flush with the cabinet face. The positioning should allow the rubber-tipped closer arm of the hinge to extend approximately 3/8- to 1/2-inch beyond the cabinet face.

Step 2

Mark the side of the cabinet where the soft close hinge's screw holes will be placed. Use a hammer to tap an awl into the screw center points as pilot holes for the hinge's mounting screws.

Step 3

Secure the soft close hinge to the cabinet with the screws provided, using a screwdriver.

Step 4

Open the cabinet door and allow it to close against the soft close hinge. The closing of the door can be adjusted by turning the hinge's end adjustment screw. Turn the screw clockwise to increase the resistance as the door closes and counterclockwise to lessen the resistance. The last 1/2 inch of the door closing should be slow and allow the door to touch softly to the cabinet face.