How to Build a Wooden Swing Door

Hunker may earn compensation through affiliate links in this story.

Things You'll Need

  • Wooden door slab

  • 2-3 double-acting spring hinges

  • Drill

  • Pencil

  • Tape measure

  • Level

  • Wood finish of choice

Warning

Double-action spring hinges are spring-loaded and will pinch your fingers if given the opportunity. Use caution when installing the hinges.

Dark-Stained Wooden Door Slab

Installing a wooden swinging door between two rooms, like the kitchen and the dining room, adds a natural piece of beauty and character to your home. A swinging door will also allow you to separate rooms while permitting easy access from either side of the door simultaneously. Swinging doors can be installed anywhere, and are not extremely difficult to install, if you have a helper. A few basic tools and swinging door hardware are required.

Step 1

Finish the wooden door in the desired manner. Finishing techniques include staining, painting, two-toning, natural finishing, waxing, etc. The door should be finished and dried before it is hung.

Step 2

Mark the desired positions of the double-acting door hinges on the butt side of the door (the hinged side of the door is referred to as the butt side). Install the hinges with screws. If the door is heavier, add three hinges to the butt side before hanging.

Step 3

Stand the door up into the door frame. Place the door into the desired position and place a level next to the door to ensure the door is level. Mark the position of the hinges.

Step 4

Have a helper hold the door up and open while you screw the door into the door jamb with a drill. Test the door to ensure that it opens and closes freely.


Josh Nuttall

Josh surprisingly found himself as an English Literature major one day after planning on becoming a doctor for most of his life. He graduated with a BS from Utah Valley University in April 2003.