A custom roll-up projection screen can suspend from a wall or ceiling. A heavy fabric will stop too much projected light from passing through and diminishing the image. Accurately measuring and cutting the fabric to the width of the roller shade will help the screen hang evenly. Fabric proportions can measure approximately 4:3 or 16:9 to correspond with the projected proportions. A roller shade or roller shade kit allows the screen to extend to different lengths for viewing, or retract when not in use.
Preparing the Fabric
Wash and iron the fabric.
Cut fabric to desired dimensions.
Finish the two side edges of the fabric by folding raw edges under and pressing.
Machine sew with a straight stitch running close to the folded edge. Press the two finished edges.
Glue one side of each of the two wood lattice strips.
Position the bottom edge of the fabric between the two glued lattice strips. Use bulldog clips to hold the fabric and strips together. Allow glue to dry.
Drive a brad through the strips and fabric at three-inch or four-inch intervals.
Attach the pull cord to the center of one lattice strip.
Staple the top edge of the fabric to the roller shade.
Fasten shade brackets to the wall.
Suspend completed projection screen.
Keep screen rolled up to stay clean when not in use.