The Ikea Lova bed canopy is a green, leaf-shaped canopy. It is secured to the wall by hanging the handle in the mounting bracket, which is screwed into the wall. Securing the mounting bracket properly will ensure the canopy does not fall on you while you sleep. The Ikea Lova canopy comes with the mounting hardware.
Hold the mounting bracket in place on the wall where you want it to go. Hold the assembled canopy next to the bracket to make sure it won't hit the ceiling. Set the canopy aside.
Pull the cover off the mounting bracket. Mark the four holes in the corners of the mounting bracket with a pencil. Use an electric drill to drill pilot holes in the wall at the places you marked.
Put the mounting bracket back in place. Use a Phillips-head screwdriver to drive the screws into the four holes until they are as tight as possible.
Push the cover back over the mounting plate. Insert the handle of the assembled canopy between the cover and the back of the mounting plate.