Perhaps you have a fabulous leather coat that you love, but the elbows and collar are fading. Or maybe your sumptuous leather sofa has developed patches of uneven color. Automobile upholstery may have faded from the sun. Even with the best of care, leather can fade and develop fine crackle lines, leaving a shabby impression. Leather can be recolored professionally, but this is quite costly. With minimal effort and expense, you can restore leather to its former glory and enjoy it for many more years to come.
Determine what type of leather you are dealing with. Using the wrong products can damage or stain your leather permanently. If you are not sure, contact the manufacturer. There are two basic categories: top coated (finished or protected) leather and naked (aniline, suede or nubuck). Water beads up on top-coated leather. Naked leather stains easily and needs to be handled especially carefully with the proper products.
Buy the leather dye (color coat) that most closely matches your leather. Have it custom matched if possible, unless the manufacturer sells it premixed. You can usually snip a 1-inch piece off the bottom of couches and chairs, but if that is not possible, get a paint chip at the store that closely matches the color you need to order a custom match.
Clean the leather thoroughly using the appropriate cleaner for your leather, following instructions on the container. Clean the entire piece, not just the areas that need recoloring.
Condition the leather on the entire item.
Apply the leather prep solution to the areas to be recolored, following the instructions on the bottle.
Recolor faded or worn areas according to instructions on the bottle of color coat. Apply with a sponge and buff out edges with a soft towel.
Protect the entire item with a protective top dressing (waterproofing) to guard the leather from future stains and soil.
Apply UV protectant to prevent future sun damage.