Instructions for a Disney Ultrasonic Winnie the Pooh Humidifier

The Disney ultrasonic Winnie the Pooh humidifier sends a steady stream of cool mist into a room for use during periods of low humidity or when additional moisture is helpful, such as if a child is sick. You can purchase the humidifier in many home retail, department, or drug stores and it has a built-in night light, automatic shut-off, and a de-mineralizer cartridge to remove minerals from the water. The humidifier can operate for up to 11 hours without needing a water.

Step 1

Lift the water tank from the main body of the humidifier and lift the lid from the top of the tank.

Step 2

Turn the tank over and remove the cap on the bottom of the water tank. Fill the tank with cold tap water. Close the cap clockwise.

Step 3

Turn the water tank back over and set it onto the main unit, turning clockwise slightly until the tank settles on the base unit. Set the lid back on top of the water tank.

Step 4

Plug the power cord into an electrical outlet and turn the dial on the front of the unit clockwise to turn the humidifier on.

Step 5

Turn the dial on the front of the unit clockwise to increase the steam mist output or counterclockwise to reduce the level of the mist. Turn the dial counterclockwise all the way to the left to turn off the unit.

Step 6

Turn off and unplug the humidifier when not in use. Empty out the water tank and let it dry.