Things You'll Need
Wait a few minutes if the gas flame is orange before using the stove. The gas flame should always be blue; if there are dust particles inside of the gas it will be orange until they burn off.
Gas stoves are more energy efficient and cost effective to run than electric stoves, using flames to heat food instead of electric burners. There are a few important reasons why a gas stove burner may not ignite, but most of them are easy to solve with regular troubleshooting techniques. In addition, your gas stove burners may need to be lit manually.
Turn the gas burner control knob to the correct starting point to ignite the burner. On some brands of gas stove top, this setting may say "lite," "light" or "start." If the knob is not turned to the correct starting point, it may not light. Turn the knob to this setting before pushing down and lighting the burner.
Clean the burner ports. These are the tiny holes where gas comes out. Over time, the holes may become clogged with debris or grease. Ensure the stove is completely off, and then poke a needle through the holes to unclog them. Cleaning the burner ports this way should be a part of regular stove cleaning and maintenance and will fix other burner issues, such as when the flame only ignites halfway around the burner or burns poorly.
Ensure the power cord is plugged in. Even though the gas range uses gas for flame, it uses an electric spark to start the stove, which will not be available if the unit is unplugged.
Light the stove manually during a power outage by pushing down the burner knob and lighting the stove with a long-handled lighter.
Nicole Papagiorgio has been writing professionally since 2005. She is a blogger and freelance writer based in Canada and has been published in the "National Post," "Ottawa Citizen" and "Vancouver Sun." Papagiorgio has an associate degree in journalism from Algonquin College in Ontario.