How to Make Bunk Bed Ladder Hooks

The top section of a bunk bed is useless unless your child has a ladder to access it. Whether you've picked up a ladderless bunk bed at a yard sale or the existing ladder is broken, it's not difficult to make a new ladder out of 2-by-4s and some wood screws. There are a few ways you can make ladder hooks to complete the bunk bed ladder, with some methods more difficult than others. A completed bunk bed ladder will enable your child to have a fun, new sleeping experience.

portrait of a young brother and sister sitting on a bed
credit: George Doyle/Stockbyte/Getty Images
Some bunk bed ladders hook on, while others are bolted to the bed.

Step 1

Purchase 2-inch flat hooks to affix to the top rails of the ladder. Flat hooks come with a wide slot on one end and a hook on the other. Hold the ladder up to the bed and mark where the hooks need to go. Drill pilot holes into the wood, then screw the flat hooks into the ladder. Ensure the hooks are upside down so the ladder will hook onto the lip of the upper bunk. Tighten the screws down so the heads lay flush with the flat hooks.

Step 2

Cut steel bar stock into two 8-inch pieces. Use a circular saw with a carbide-tipped blade or have the pieces cut at the home improvement store. You can also get metal cut at a local metal shop. Wrap the flat steel bar in cloth and hold it around a sturdy metal object, like a pole or table saw leg. Pull the ends of the bar toward you until it bends. Adjust the bar on the pole and bend again. Work with the bar until it is bent into a hook shape. Repeat with the other bar. Drill bolt holes into the metal with a carbide-tipped bit and bolt the metal strips to the ladder. Secure the bolts with nuts.

Step 3

Purchase bunk bed replacement hooks from a bedroom furniture store or an online retailer. Replacement hooks for bunk beds are available in a range of sizes and styles. These come with bolt holes already drilled into the metal and are often resin coated to protect the wood of the bunk bed.