×

How to Build a Tree House Ladder

Tree houses provide entertainment and a place for kids and even adults to get away and have time for themselves. Tree houses should have a safe and sturdy ladder for access between it and the ground.

This article walks you through instructions on building a simple, yet solid, 10-foot-long tree house ladder out of 2-by-4s using a few simple tools.

Tip

Adjust the 10-foot measurement for the sides of the ladder to make the ladder a different length.

Warning

Be cautious when using power tools.

  1. Cut eight 2-foot-long pieces of 2-by-4 with the circular saw for the steps of the ladder. Leave two pieces at 10-foot for the sides.

  2. Sand all rough edges off the eight cut pieces and the two 10-foot pieces. Apply wood stain or paint and allow to dry. Next, apply water sealant to all ten pieces.

  3. Lay the two 10-foot 2-by-4s on edge parallel to each other 2 foot apart. Lay a 2-foot piece on the wide edge in between them so it runs perpendicular. Place it 6 inches inwards from one end of the sides. Drive 3 screws through both 10-foot sides into the ends of the 2-foot piece.

  4. Lay another 2-foot piece on the wide edge in between the sides 6 inches inwards from the other end. Drive 3 screws through both 10-foot sides into the 2-foot piece.

  5. Equally space the remaining six 2-foot pieces between the top and bottom steps and screw them to the sides. Make sure you use 6 screws for each step, 3 on each side. Stand your ladder up.

The Drip Cap

  • Tree houses provide entertainment and a place for kids and even adults to get away and have time for themselves.
  • Cut eight 2-foot-long pieces of 2-by-4 with the circular saw for the steps of the ladder.
  • Make sure you use 6 screws for each step, 3 on each side.