Copper sulfate is used in some products sold to eliminate algae from swimming pools. This chemical can stain the pool surface and cause cloudiness in the water. The best solution to avoid these side effects of copper sulfate in the future is to use an algaecide that does not contain copper sulfate. If your pool currently contains copper sulfate, you can remove it using a straightforward procedure.

Many algaecides for use in swimming pools contain copper sulfate.

Step 1

Test the water in your swimming pool using a pool chemistry test kit to determine how high the copper sulfate level is. Make sure that the kit you purchase includes a test for copper sulfate. Follow the instructions on the kit for testing the level of copper sulfate.

Step 2

Add a chelating agent to the water in a quantity per the instructions on the label according to pool size and the level of copper sulfate that is present. The chelating agent will bind with the copper sulfate and allow it to be carried away in the pools filtration system. Chelating agent is sold in liquid form and can be purchased inexpensively from a pool supply store. Your local pool store will give you guidance for purchasing the right chemical for removing copper sulfate from your water. Handle it with the same care as you would any other pool chemical.

Step 3

Allow the chelating agent to circulate in the pool for several hours. Test the water again and if the copper sulfate is still present at a high level, add more of the chelating agent and let it circulate.