How to Get Rid of Static in a Vacuum Hose

Static in a vacuum hose isn't so much caused by the hose, as it is caused by the surroundings where it is being used. The actual hose will conduct static electricity from other objects, and things like carpeting and dry households are static magnets. The process is created by the friction between a vacuum hose and everything else it is rubbed against, which is particularly the case during vacuuming. This will create a static electricity charge that can be transferred to you or any other object the hose touches.

...
You can get rid of static electricity in any vacuum hose.

Step 1

Replace a plastic vacuum hose with an aftermarket rubberized hose. Unlike plastic, rubber does not conduct static electricity very well, so this change alone may eliminate static electricity from a vacuum hose.

Step 2

Make an antistatic solution before vacuuming by mixing a tablespoon of fabric softener in a spray bottle full of water. Spray this solution on your rugs and carpeting to be vacuumed to cut down on static.

Step 3

Run a humidifier in the room or area to be vacuumed. The moisture cuts down on static electricity in the air and on objects, which means it won't readily be transferred to the vacuum hose.

Step 4

Spray a commercially made antistatic spray, which can be found at department and hardware stores. It can be sprayed directly onto and into the hose, as well as all the objects in and around the area to be vacuumed.