Most mantle, cuckoo and grandfather clocks have a glass cover over the clock face and hands to protect metal hands from rusting. After years of operation, the hands may become rusty from moisture or humidity leaking into the glass dome and onto the hands. When clock hands rub together, they may bend and not operate as smoothly or stop altogether. Removing clock hands, straightening, resurfacing and painting them return the hands to a new appearance.

...
Clock hands need occasional repairs to straighten them for smooth operation.

Step 1

Grasp the glass face cover on the right side of the clock and pull it out toward the clock face. Swing the face cover to the left to reach the clock hands on the face.

Step 2

Place a pair of needle nose pliers on the nut covering the hands in the center of the clock. Turn the nut counterclockwise to loosen and pull it straight off.

Step 3

Pull the second, minute and hour hand straight off the clock face one at a time.

Step 4

Set each of the hands on a towel on a table or other flat surface where they do not touch each other with the backside of each pointing up.

Step 5

Strike each of the hands with a hammer with medium force to straighten any bends in the hands.

Step 6

Turn each hand over and strike with a hammer if necessary to straighten the hands.

Step 7

Sand any rust off each hand on the front and back with fine grit sandpaper.

Step 8

Place each hand face up on a table with newspapers.

Step 9

Lightly spray a coat of black spray paint on each hand. Press the nozzle on top of the spray can and pass from left to right over the hands in a fluid movement. Let the coat of paint dry entirely for about five minutes.

Step 10

Apply additional coats of paint to the front of the hands as necessary with five minutes drying time between coats. Let the last coat of paint dry for one hour.

Step 11

Slide each of the hour, minute and second hands on the clock face with the hole in the center of each on the center bolt. Place the nut on the center of the clock and tighten it by turning clockwise with needle nose pliers.

Step 12

Turn the smallest hand on the front of the face to set the correct time on the clock.

Step 13

Close the glass door and listen for an audible click when it is secure.