Antique tool dealers and collectors often come across dirty and rusty tools. When restoring old tools, it is essential to only clean them. Old tools should not be refinished, as finishing is not reversible and will cause the tools to lose value. Since oxygen and water usually mar most metals over time, rust is the primary factor with old tools. Rust and dirt can be removed from old tools, using certain solutions and materials. Abrasives should never be applied to antique tools, but can be used on common user tools.

...
Old tools should be cleaned properly and carefully.

Cleaning antique tools

Step 1

Apply a high-quality museum grade wax to a soft rag. Rub the rag over the entire tool to safely remove rust and dirt. Since wax can be removed easily, the tool will not be harmed.

Step 2

Inspect the tool for further rust. If the tool is still extremely dirty and rusty, apply dry automotive rubbing compound sparingly to a soft rag. Use red rubbing compound, not the finer white polishing compound.

Step 3

Rub the red compound into the tool, using the soft rag. Continue to apply rubbing compound to the tool until no more dirt and rust remain.

Cleaning common user tools

Step 1

Dampen an old cloth in linseed oil. Wipe the dampened cloth over the tool, to thoroughly coat the metal with the oil.

Step 2

Allow the linseed oil to soak into the metal for 10 minutes. Use a stainless steel brush to scrape off rust and dirt from the tool.

Step 3

Apply a couple of drops of liquid dish detergent to a clean cloth. Dampen the cloth with water, to create suds.

Step 4

Clean the tool with the soapy cloth, to rinse off the linseed oil and remove remaining dirt. Rinse the tool with water, to remove the soapy solution.

Step 5

Wipe the tool thoroughly with a dry towel. Failure to dry the tool will cause it to rust again.